EM2030
Sound Level Monitor

Measuring really couldn't be easier. Just connect the microphone and plug in the EM2030 and measurement starts automatically. The monitor will continue logging sound levels until power is removed. Changing the measurement settings is simple too. The user interface to the EM2030 is through a web browser over Wi-Fi link, so you can connect using a laptop or smart phone. We know it can be difficult to make changes to configurations when equipment is already installed, we've been there. So the EM2030 is different, there are no small buttons or screens and no complicated menus to look through when you are on site. Simply connect to the Wi-Fi network and log in using your favourite browser. You can download readings, calibrate the monitor and change the measurement set up. Then just reboot the system and your changes will be applied.

No problem. The EM2030 is fully automated so it will just start measuring again as soon as power comes back on. And what's more, we will know if your measurement site goes down. Our performance monitoring software checks to ensure that your measurement site is reporting on schedule, so if power goes off we will email you to let you know.

That's automated too. The EM2030 comes with a GSM modem installed and we provide the SIM card to work on the local 3G/4G network. Readings are automatically uploaded to our database every day so that you can access everything online.

Our cloud based software lets you manage your measurement sites and analyse your data. There is no need for a phone contract or trying to configure network settings. The data costs are part of our pricing model and are covered by an annual payment.

We have an international data solution that lets our equipment operate out of the box in almost 200 countries. This is still dependent on good network coverage in the area. Data costs and speeds can vary between networks and countries, so get in touch with us and we can find the best solution for your project.

When you receive one of our sound level monitoring stations we provide a secure login to our website which gives access to all your readings. Using this platform you can access raw data files, plot graphs, export spreadsheets and set up automated analysis functions for processing your data.

You can also connect to the EM2030 over the local Wi-Fi interface. All your readings are stored on the device and can be downloaded for analysis or back up.

You can calibrate the EM2030 easily in the field using an acoustic calibrator. Simply pop the weather protection kit off the top of the microphone and place the acoustic calibrator over the top.

Connect to the user interface to see the levels and run the calibration routine.

The whole process should take about two minutes.

We recommend that the EM2030 should undergo periodic testing to IEC 61672-3 every 2 years.

This can be carried out at our offices in Dublin or throughout a network of international partners. If you have a local laboratory that you work with then we can support them with all the documentation they need for calibrating the equipment.